Southport Powder Coating is an in house company that has been operating alongside Aluminium Balustrades
for the past 21 years.

SPC offers an excellent service with pre treatment and powder coating and is an Accredited Applicator of both Dulux & Interpon to apply a powder coating finish of warranty products. SPC offer hundreds of standard colours as well as warranty colours for you to choose from to suit all your powder coating needs.


Powder coating is a long lasting finish that can be applied to any metal product.

Click to find your colour

Click to find your colour



> > Contact Details

Southport Powder Coating P/L

2/36 Bailey Crescent

5531 3241

> > Care & Maintenance of Powder Coated Surfaces
The effects of ultra violet light, pollution, dirt, grime and salt deposits can all accumulate on your powder coated surface over time. To extend the effective life of powder coatings, as a general rule cleaning should take place every 6 months. However, in areas where pollutants are more prevalent, especially in immediate coastal regions, a cleaning program should be carried out on a more frequent basis (i.e. every three months)

 > > To clean your powder coated surface

  1. Carefully remove any loose deposits with a wet sponge.
  1. Use a soft brush (non abrasive) or cloth, and a mild household detergent solution to remove dust, salt and other deposits.
  1. Rinse off with clean fresh water.

Detergents that recommend the use of gloves when handling should be avoided as this is a good indication that the detergent is harsh and therefore, unsuitable for cleaning your powder coating.

Although some strong solvents are recommended for removing sealants or other building residues, these may be harmful to the extended life of the powder coated surface and should also be avoided as the damage may not be visible immediately and may take up to twelve months to appear.

If paint splashes, sealants or other residue need to be removed, then either Methylated Spirits, Turpentine, or White Spirits may be used safely.